Treasure Cove TC-1023 Instrukcja Właściciela Pobierz pdf (Strona 6)

1. SENS--- sensitivity control and also used as power switch.

Fully counter-clockwise rotate the switch to OFF to turn off the power. Rotate

it clockwise away from OFF to turn on the power. When you rotate the SENS

from 0 to 10, the sensitivity is gradually increased. 0 is the lowest position for

SENS; while 10 is the highest position. In general case, user can set the

SENS to a high position. But in mineralized area, or area with electrical

interference, it’s better to lower the SENS properly.

2. MODE SWITCH

· DISC--- in this mode, the unit comes with auto ground balance. The mode

DISC/TONE can facilitate you to search for and discriminate the target

type based on the long or short tone for different metal target.

· ALL METAL----to search for all kinds of metal object. In this mode, the

unit comes with auto ground balance, but without discrimination ability.

· TONE---works with DISC/TONE. Discriminates different metal types

with two different tones (high or low).

3. TARGET---to pinpoint the target. Press this button to lower the sensitivity

automatically and to locate the target.

4. LOW BAT---after long time of operation, the battery voltage will become low.

When LOW BAT indicator lights, user has to replace the battery.

5. PHONE-- Insert the stereo headphones’ 3.5mm plug into the PHONE jack. At

this time the internal speaker is disconnected.

6. DISC/TONE—discrimination control. You can rotate the control clockwise

from 0 to 10 to discriminate the different metal type. DISC will discriminate

the metal type with different tones, such as long tone, short tone or without

tone. But in TONE mode, unit will discriminate the metal type with high or low

tones.

7. VIEW METER—when the metal target is found, the meter pointer will swings

to the right.

1 2 3 4 5 6 7 8 9 10

Brak uwag

Treasure Cove TC-1023 Instrukcja Właściciela Strona 6